AUSTRALIAN MADE IN PORT MACQUARIE
THE GWORKS APPROACH
A tray isn't just something your ute carries.
It becomes the foundation for everything that comes after it.
Storage. Water. Canopy fitment. Vehicle clearance. Fuel fillers. Cameras. Sensors. Lighting. Accessories.
That's why we design the tray around the vehicle and how it will be used, rather than treating each part as something to solve later.
The result is a tray that works as part of the vehicle and provides the foundation for what comes next.
DESIGNED AROUND THE VEHICLE. BUILT AROUND HOW YOU USE IT.
ENGINEERED INTO THE DETAILS
HERE'S HOW WE ENGINEER THEM.
VEHICLE SPECIFIC DESIGN
FITMENT THAT LOOKS INTENTIONAL BECAUSE IT IS.
MOUNTING
THE FOUNDATION UNDER THE FOUNDATION.
CLEARANCE
DESIGNED FOR THE VEHICLE. NOT JUST THE PHOTO.
STORAGE AND WATER
MORE USEFUL SPACE. LESS WASTED SPACE.
VEHICLE INTEGRATION
THE VEHICLE STILL NEEDS TO WORK LIKE THE VEHICLE.
START WITH THE VEHICLE. BUILD FROM THERE.
DESIGNED AROUND THE VEHICLE.
Fuel filling, lighting, clearances and factory vehicle systems are considered as part of the vehicle specific fitment from the beginning.
*Integration requirements vary by vehicle, model and factory equipment.
Configured your tray? Send your selection through to our team and we’ll help you work through vehicle fitment, options and the next stage of your build.
START YOUR BUILDCONFIGURED YOUR TRAY?
Send your selected vehicle and tray configuration through to our team. We’ll help you confirm fitment, options and the final details for your build.
REAL GWORKS BUILDS
From work vehicles to touring builds, see how different customers have put their GWorks trays to use.
PRO SERIES TRAY
DUAL CAB
SIGNATURE TRAY + TRAY SIDES
PRO SERIES TRAY
DUAL CAB
SIGNATURE TRAY + WHEEL CARRIER
PRO SERIES TRAY
DUAL CAB
WORK AND PLAY + TRAY SIDES + REAR LADDER RACK + WHEEL CARRIER
AUSTRALIAN MANUFACTURING
Every GWorks tray starts with raw aluminium and moves through our manufacturing process here in Australia.
From design and CNC processing through fabrication, welding, finishing and assembly, we control the process from beginning to end.
Because when our name goes on the finished product, we're responsible for how it's made.
WHEN WE SAY AUSTRALIAN MADE, WE MEAN MADE HERE.
BUILT FOR WHAT COMES NEXT
How you use your vehicle today might not be how you use it in three years.
That's why the tray is designed as a platform that can evolve as your requirements change.
01
02
03
BUILD IT FOR TODAY. LEAVE ROOM FOR TOMORROW.
WARRANTY & SUPPORT
Building the product ourselves means taking responsibility for what we put our name on.
GWorks trays are backed by our Lifetime Structural Warranty for the original end user purchaser, subject to GWorks warranty terms.
And because we manufacture here in Australia, the people standing behind your warranty are part of the same business that built your tray.
LIFETIME
STRUCTURAL WARRANTY
For the original end user purchaser, subject to GWorks warranty terms.
ORIGINAL END USER
CORPORATE ORIGINAL PURCHASER
THIRD PARTY COMPONENTS
WE BUILD IT. WE BACK IT.
COMPLETE THE SETUP
A tray is one part of a complete vehicle setup.
When you're ready to take the build further, GWorks can help bring the rest of the vehicle together around how you work, travel and use it.
CANOPIES
STORAGE
WATER
ELECTRICAL
ACCESSORIES
START WITH THE TRAY. BUILD THE REST AROUND IT.
FREQUENTLY ASKED QUESTIONS
Everything you need to know before choosing a GWorks tray. If you still have questions, our team can help you work through the right setup for your vehicle.
GWorks trays are available across a range of vehicle platforms and cab configurations. Start with your vehicle in the tray configurator above and we'll show you the tray sizes and configurations available for your setup.
Tray weight varies depending on the platform, tray length and configuration selected. Use the configurator above to view the approximate weight for your selected setup.
Final vehicle payload and axle capacities should always be considered when planning the complete build.
Inclusions vary depending on the tray configuration you choose. Select your vehicle and tray configuration above to see exactly what's included, along with the available upgrades for that setup.
Yes. GWorks trays are designed with future canopy fitment in mind, allowing you to start with the tray and add a canopy later when your requirements change.
In some cases, yes. Where the new vehicle uses the same GWorks tray platform, vehicle specific components can be changed to adapt the tray to the new vehicle.
Compatibility depends on the vehicles involved, so speak with our team before changing vehicles and we can confirm what is possible.
Where applicable, factory cameras, sensors, fuel fillers, lighting and other vehicle systems are considered as part of the tray fitment.
Integration requirements vary between vehicles, so the exact solution depends on the vehicle platform and specification.
GWorks trays are manufactured at our facility in Port Macquarie, NSW. From raw material through CNC processing, fabrication, welding, finishing and assembly, the manufacturing process is completed here in Australia.
GWorks trays are backed by a Lifetime Structural Warranty for the original end user purchaser, subject to GWorks warranty terms. Corporate original purchasers receive a 10 year structural warranty.
Third party components are covered by the individual manufacturer's applicable warranty terms.
Yes. Your GWorks tray can be configured with a range of storage, water, accessories and other options to suit how you use your vehicle.
The dimensions of our manufactured components, however, are fixed. Our tray platforms have been developed around defined dimensions, materials, manufacturing processes and fitment requirements to provide a consistent and repeatable product.
Maintaining these specifications allows us to control how the product is manufactured, fitted and supported, and is an important part of the engineering behind the product and the structural warranty we provide.
Rather than altering engineered components for individual builds, we configure the GWorks platform around your vehicle and requirements using the available tray configurations, vehicle specific components and compatible options.
GWorks trays can be fitted at our Port Macquarie facility or through selected authorised GWorks fitment locations.
Availability depends on your location and vehicle, so speak with our team and we'll help determine the most suitable fitment option.
START YOUR BUILD
Tell us about your vehicle, how you use it and what you want from the finished setup.
Our team can help you work through the right tray configuration, the options that make sense for your vehicle and what the next stage of the build could look like.
START WITH YOUR VEHICLE. WE WILL HELP YOU BUILD FROM THERE.
AUSTRALIAN MADE. VEHICLE SPECIFIC. BACKED BY GWORKS.
